扭剪扳手怎么換套筒？

How to change the socket for a torsion wrench?

　　更換扭剪扳手的套筒需要遵循以下步驟：

To replace the socket of the torsion wrench, the following steps need to be followed:

　　準備工作。準備新的套筒和所需的工具，如扳手和螺絲刀。將扭剪扳手放置在平穩的工作臺上，避免意外滑落。

Preparation work. First, prepare a new socket and the necessary tools, such as a wrench and screwdriver. Place the torsion wrench on a stable workbench to avoid accidental slipping.

　　拆卸舊套筒。將扳手的手柄部分壓下并向前移動，使套筒露出；使用扭力扳手或合適的工具松開套筒螺母；拆卸舊套筒，并確保將其放在的地方。

Remove the old sleeve. Press down the handle of the wrench and move it forward to expose the sleeve; Use a torque wrench or suitable tool to loosen the socket nut; Remove the old sleeve and ensure it is placed in a safe place.

　　安裝新套筒。將新套筒放置在扭剪扳手的頭部上，確保它能牢固卡??；使用扭力扳手旋緊新套筒的螺母，確保安裝牢固。

Install a new sleeve. Place the new sleeve on the head of the torsion wrench to ensure that it can firmly engage; Use a torque wrench to tighten the nut of the new socket to ensure secure installation.

　　測試新套筒。使用扳手?jǐn)Q緊螺絲或螺母，確保新套筒工作正常，檢查是否有松動或異響。

Test the new sleeve. Use a wrench to tighten the screws or nuts, ensuring that the new socket is working properly, and check for any looseness or abnormal noise.

　　在整個過程中，注意選擇與所需螺栓或螺母相匹配的正確尺寸的套筒。如果您的扭剪扳手是特定型號（如電動扳手），請遵循該型號特定的操作指南。

Throughout the process, pay attention to selecting the correct size sleeve that matches the required bolts or nuts. If your torque wrench is a specific model (such as an electric wrench), please follow the specific operating instructions for that model.

本文由扭剪扳手提供技術支持，更多的詳細精彩內容請點擊我們的網站http://www.omj888.com我們將會全心全意為您提供滿意的服務。

This article provides technical support for the price of the torsion wrench. For more detailed and exciting content, please click on our website http://www.omj888.com We will wholeheartedly provide you with satisfactory service.