扭剪螺栓就是鋼結構螺栓，也屬于高強度螺栓，也是標準件的一種。而了解鋼結構螺栓主要看鋼結構螺栓分類、施工。如果你是外行，如有需要用到這些配件的時候一定要提前了解一下相關知識，只有這樣才不會選錯產品。今天就隨天圣小編來看看鋼結構螺栓解析，以供大家參考。

　　Twisted shear bolts are steel structure bolts, which belong to high-strength bolts and are also a type of standard component. And understanding steel structure bolts mainly depends on the classification and construction of steel structure bolts. If you are a layman, it is important to understand the relevant knowledge in advance when using these accessories, so as not to choose the wrong product. Today, let's take a comprehensive analysis of steel structure bolts with the Tian Sheng editor for your reference.

　　一、鋼結構螺栓運用

　　1、 Application of Steel Structure Bolts

　　鋼結構螺栓主要應用在鋼結構工程上,用來連接鋼結構鋼板的連接點。鋼結構螺栓是一種高強度的螺栓，也是標準件的一種。緊固性能比較好，用于鋼結構上，工程上，使緊固作用的。一般鋼結構上，要求的鋼結構螺栓都是8.8級以上的，還有10.9級，12.9級的，全部都是高強度的鋼結構螺栓，有時鋼結構上的螺栓是不需要電鍍的，用本色就OK。

　　Steel structure bolts are mainly used in steel structure engineering to connect the connection points of steel plates in steel structures. Steel structure bolts are high-strength bolts and also a type of standard component. The fastening performance is relatively good, used in steel structures and engineering to enhance the fastening effect. On general steel structures, the required steel structure bolts are grade 8.8 or above, as well as grade 10.9, 12.9, all of which are high-strength steel structure bolts. Sometimes, bolts on steel structures do not require electroplating and can be used in their natural color.

　　二、鋼結構螺栓分類

　　2、 Classification of Steel Structure Bolts

　　鋼結構螺栓分為扭剪型高強螺栓和大六角高強螺栓,大六角高強螺栓屬于普通螺絲的高強度級,而扭剪型高強螺栓則是大六角高強螺栓的改進型,為了更好施工。

　　Steel structure bolts are divided into torsion shear high-strength bolts and large hexagonal high-strength bolts. Large hexagonal high-strength bolts belong to the high-strength level of ordinary screws, while torsion shear high-strength bolts are an improved type of large hexagonal high-strength bolts for better construction.

　　三、鋼結構螺栓施工

　　3、 Construction of steel structure bolts

　　鋼結構螺栓的施工必須先初緊后終緊,初緊鋼結構螺栓需用沖擊型電動扳手或扭矩可調電動扳手;而終緊鋼結構螺栓有嚴格的要求,終緊扭剪型鋼結構螺栓必須用扭剪型電動扳手,終緊扭矩型鋼結構螺栓必須用扭矩型電動扳手。

　　The construction of steel structure bolts must be initially tightened and then finally tightened. The initial tightening of steel structure bolts requires an impact type electric wrench or a torque adjustable electric wrench; And there are strict requirements for the final tightening of steel structure bolts. The final tightening of torsional shear type steel structure bolts must use a torsional shear type electric wrench, and the final tightening of torque type steel structure bolts must use a torque type electric wrench.

　　本文來自：扭剪螺栓專用扳手更多精彩內容請點擊我們的網站：http://www.omj888.com 我們將傾情為您解答。

This article is from: Twist shear bolt special wrench. For more exciting content, please click on our website: http://www.omj888.com We will wholeheartedly provide you with answers.